|
PDF Files |
|
AutoCAD Drawings |
|
Pro-Down Discus Cage |
|
Specification Compliance: NFHS Materials: Six 11’ high galvanized steel posts angled at the top for added protection. Net is heavy-duty weather treated 1 7/8” nylon mesh with a breaking strength of over 180lbs. Top of the nets has grommets every 24” with special easy clip-on hanging hooks. Includes six ground sleeves for posts. 80401 Pro-Down Cage w/ ground sleeves Buy 80402 Pro-Down Cage w/ ground plates Buy 80405 Pro-Down Cage Replacement Net Buy |
|
High School Discus Cages |
|
Specification Compliance: NFHS The new 8010 Gill High School Discus Cage is designed to the 34.92° throwing sector configuration. The 8010 aluminum pole cage has the traditional six pole layout and incorporates 14’ tall rolled aluminum offset poles. Thirty-four inch steel flip arms secure the 14’ by 56’ net at the front two poles with ground stakes used at the back poles. The nylon net has a breaking strength of 180lbs. 8010 Steel High School Discus Cage M2055 Replacement Net for 8010 (14’ x 56’) 80102 Barrier Net for 8010 |
|
731135 Discus Sector Net |
|
340lb. break strength discus net stands 2’ tall x 60’ long. Held by 3/4” diameter steel net poles and ground stakes. Effectively stops shot or discus from rolling or skipping outside of the throwing sector. Use one net to cover the shot put sector. Use 3 for the discus sector. Polyethylene net spools included for convenient storage and handling. 731135 Sector Net Buy |
|
NCAA Discus Cages |
|
The 732130, NCAA Discus Cage, consists of eight, 5.3m tall, rolled aluminum net poles with ground sleeves and a weather treated nylon net. The rolled net poles are 2 7/8" OD, 0.203 wall, 6063-T6 aluminum tube. Each pole stands in a 36" deep ground sleeve. Galvanized steel tubes support the net between the first two poles on each side. Four hinged net arms, at ground level, hold the net in place at the front of the cage. The net is 340 lb. test nylon which has been weather treated for extended service life. The net has a special cut out and extra section in the back to allow for easier access to the throwing circle. The narrow cage opening greatly reduces the area outside the landing sector that a errant thrown discus can land in while not impeding a good throw. This layout is still less restrictive than the current IAAF cage specifications. Wider openings are possible by adjusting sleeve positions but will result in a larger implement landing danger zone. 732130 Aluminum NCAA Discus Cage Buy 732133 Replacement Net for 732130 (16’-6”x68’-6”) Buy 732132 Barrier Net for 732130 Buy |
|
732140 Aluminum IAAF Discus Cage |
|
Specification Compliance: IAAF The 732140, IAAF Stadium Discus Cage, consists of nine, 5.3 meter tall, rolled aluminum net poles with ground sleeves and a weather treated nylon net. The poles are 2 7/8" OD, 0.203 wall, 6063-T6 aluminum tube. Each pole stands in a 90 cm deep ground sleeve. Galvanized steel tubes support the net between the first two poles on each side. Four hinged net arms, at ground level, hold the net in place at the front of the cage. The net is 340 lb. test nylon which has been weather treated for extended service life. The net has a special cut out and extra section in the back to allow for easier access to the throwing circle. This layout meets IAAF requirements for the new smaller 34.92 degree landing sector in a stadium with spectators all the way around and other events taking place. 732140 Aluminum IAAF Discus Cage Buy 732143 Replacement Net for 732140 (5m x 24.8m) Buy 732142 Barrier Net for 732140 Buy |
|
Aluminum Discus Cages Gill rolled aluminum discus cages are fabricated from 2 7/8” O.D. x 0.203” wall aluminum tube. Each pole has a 33’ rolled offset and stands in a 30” to 36” deep ground sleeve. Ground sleeves are schedule 40 PVC pipe and will not rust. To reduce or eliminate net sag, cages employ either a vinyl coated steel net support cable, or galvanized steel net support tubes between the first two net poles. Nets have a 1 7/8” mesh and are made of weather treated nylon. Weighted steel flip arms secure the end of the net at the cage mouth. Optional 8’ outer barrier nets are available for these cages. Steel Discus Cages Gill rolled steel discus cages are fabricated from 2 1/2 square, 14 gauge steel tube finished with durable white powder coat paint each pole has and 18” rolled offset and stands 14’ tall in a 20” deep ground sleeve. Cages employ a vinyl coated steel net support cable to reduce net sage, ensuring maximum net height, and 14 ft tall weather treated nylon nets. Overall mounted net height exceeds 13’2” (4m). Nets are secured at ground level with stakes. Optional 8’ outer barrier nets are available for these cages. |
|
T r a c k and F i e l d F a c i l i t y P l a n n i n g C D |
|
a complete guide to athletic facilities equipment |
|
General Info |
|
Contact Us |
|
Product List
|
|
CD Instructions |
|
License Agreement |
|
Track/Field Layouts |
|
Related Links |
|
Home |
|
Same as the 8020, except that the new 8021 high school discus cage incorporates the same rear-entry system that the larger cages have. This feature speeds up competition and practice times with out compromising safety. 8021 Alum HS Rear-Entry Discus Cage Buy 80211 Replacement Net for 8020 (14’ x 67’) Buy 80212 Barrier Net for 8021 Buy |
|
Gill High School Discus Cages are designed to the 34.92° throwing sector configuration. The 8030 steel pole cage has the traditional six pole layout and incorporates 14’ tall rolled steel offset poles. Eighteen inch steel flip arms secure the 14’ by 56’ net at the front two poles with ground stakes used at the back poles. The nylon net has a breaking strength of 180lbs. 8030 Steel High School Discus Cage Buy M2055 Replacement Net for 8030 (14’ x 56’) Buy 80302 Barrier Net for 8030 Buy
|
|
The new 8020 aluminum pole cage incorporates seven 14’ tall rolled aluminum offset poles. This new design allows the net to extend straight forward from the sides to comply with NFSHSA 34.92° sector requirements while providing a less “restrictive” feeling for throwers. Thirty-four inch steel flip arms secure the 14’ by 68’ net at the front two poles. Nets are constructed of #504, weather-treated nylon with a breaking strength of 180lbs. 8020 Aluminum High School Discus Cage Buy 80201A Replacement Net for 8020 (14’ x 67’) Buy 80202A Barrier Net for Extended 8020 Buy |