1 653 Essentials Pole Vault Landing System  1 65302 Weather Cover 1 Pair 715F Base Pads 1 Pair 7100 Essentials Pole Vault Standards- 1 523 Essentials Pole Vault Crossbar Only Available in Royal Blue Vinyl and Gray Mesh. ...
Part No: VP300
This economical pole vault landing system meets all high school rules requirements, including the recommended preferred landing zone. In place of a standard top pad, the Essentials Pole Vault Landing System employs a skirted mesh top that hold the units together for a snug fit. Hook and loop box cut-out fastener. Royal Blue only. Five year warranty. Overall size: 19'9" x 20'2" x 26" Overall ...
Weather Cover for the Gill Maximus Double Front Pole Vault Pit. Pit size is 21'6" x 44' x 32". (Weather Cover not shown in ...
Part No: 66711D02
Weather Cover for the Gill International Double Front PV Pit. Pit size is 21'6" x 38' x 32". (Weather cover not shown in ...
Part No: 66511D02
Weather Cover for the Gill Double Front National Pole Vault Pit. Pit size is 21'6" x 35' x 32". (Weather Cover not shown in ...
Part No: 66311D02
Weather Cover for the Gill Maximus Pole Vault Pit. Pit size is 21'6" x 30' x 32". (Weather Cover not shown in ...
Part No: 6671102
Weather Cover for the Gill International Pole Vault Pit. Pit size is 21'6" x 27' x 32". (Weather Cover not shown in ...
Part No: 6651102
Weather Cover for the Gill National Pole Vault Pit. Pit size is 21'6" x 24' x 32". ...
Part No: 6631102
Weather Cover for the Gill Scholastic II Pole Vault Pit. Pit size is 21'6" x 23'5" x 28". ...
Part No: 6561102
Weather cover for the Scholastic I Pole Vault Pit. Pit size is 19'9" x 20'2" x 28". ...
Part No: 6541102
Standard base pads specifically designed for AGX M4 Pole Vault Standards. This set of base pads are compatible with Gill pits purchased September 2017 and before. Sold in pairs. ...
Essentials Weather Cover for the Gill Essentials Pole Vault Pit. Pit size is 19'9" x 20'2" x 26". Available in Royal Blue only. (Weather Cover not shown in ...
Part No: 65302
With aluminum construction and an 18" square, powdercoated, steel roll away base, the PV Standard Settings Display stands 5' 10" tall, with two 9"numerals and rotates 360° for visibility. ...
Part No: 724
For pole vault standards: Protect standards, poles and competitors from harm with this pole vault standard accessory. Padding fits snug around the standard facing the inside of the pit. Open in the back to allow for setting of height and access to tightening knob. High density foam with gray vinyl casing. For hammer cage: Encases the front half of the top horizontal member of the cage door to ...
The Anti Gravity crossbar features our durable pulltruded fiberglass rod paired with state of the art ends. These ends have a half moonprofile which lowers the center of gravity of the bar. The result is a crossbar that is more stable allowing your athlete to defy gravity andjump to new heights. Crossbars are not guaranteed against breakage. Meets High School and NCAA specifications. IAAF ...
Made from the same material as our International bars but with one big benefit, reduced shipping cost! When properly assembled this bar meets NFHS and NCAA rules but can be shipped overnight if needed. ...
Part No: 532
A simple way to measure the PV crossbar height. Fits over almost any vaulting pole. ...
Part No: 723A
Durable pulltruded fiberglass with replaceable ends. An excellent choice for high school competition. Crossbars are not guaranteed against breakage. Meets High School specifications. ...
These concrete anchors secure any of our pole vault standard bases as required by NFHS rule 7-4-11. Set of 8. ...
Part No: 7115
Large easy to read numbers allow coaches or officials to easily identify the take off step placement in the pole vault. ...
Part No: TA189